Initialization - Epson Stylus 800 Series User Manual

Initialization

The printer can be initialized (returned to a fixed set of conditions) in
three ways:
Hardware initialization
Software initializatlon
Control panel initialization
The power is turned on.
l
The printer receives a n m signal
l
from the parallel interface (pin 31
goes LOW).
The following condition then results:
cleared.
Software sends the ESC @ (initialize
l
the printer) command.
The following condition then results:
(The last panel settings are
Hold down the ALT button and press
l
the LOAD/EJECT button.
A-11
Appendix