Auto line feed
When the auto line feed feature is on, each carriage return (CR)
code is accompanied by a line feed (LF) code. If your printed
text is unexpectedly double-spaced, set this feature to off. If text
lines print on top of each other, set it to on.
Changing the default settings
To change the printer's default settings, you press the control
panel buttons; the control panel lights show your selections.
Follow the steps below to make your changes:
the paper feeder.
the printer to enter the default-settings mode. (Hold down
the button until the printer starts working; it takes a few
seconds.)
The printer loads a sheet of paper and prints a brief
summary and instructions. It instructs you to select the
language that you want messages printed in (English,
French, German, Italian, or Spanish).
language of your choice; then press the Alt button to make
your selection.
Spanish
0
l off
Using Other
Printer
Functions 2-15