Important Safety Instructions - Epson Stylus 800 Series User Manual

As the colours of the wires in the mains lead of this appliance
may not correspond with the coloured markings identifying the
terminals on your plug, proceed as follows:
The green and yellow wire must be connected to the terminal in
the plug which is marked with the letter E or with the earth
symbol ( f ) or coloured green or green and yellow.
The blue wire must be connected to the terminal in the plug
marked with the letter N or coloured black.
The brown wire must be connected to the terminal in the plug
marked with the letter L or coloured red.
If damage occurs to the plug, replace the cord set or consult a
qualified electrician.
Replace fuses only with a fuse of the correct size and rating.
Safety
Important
Read all of these instructions before you set up your
printer.
Follow all warnings and instructions marked on the printer.
Unplug this printer from the wall outlet before you clean it.
Use a damp cloth for cleaning and do not use liquid or
aerosol cleaners.
Do not use your printer near water or spill any liquid on it.
Do not place your printer on an unstable cart, stand, table,
or other surface that may allow the printer to fall.
6 Introduction
Instructions