Removal And Replacement Of Parts; Splash Guard (Kleenscreen Fryers Only); Cooking Controls; Discard Valve Switch (Kleenscreen Fryers Only) - Vulcan-Hart 1GR45A Service Manual

GRA SERIES GAS FRYERS - REMOVAL AND REPLACEMENT OF PARTS

REMOVAL AND REPLACEMENT OF PARTS

SPLASH GUARD
(KLEENSCREEN FRYERS ONLY)
1. Open fryer section doors.
2. Remove screws securing splash guard.
3. Remove splash guard.
4. Reverse procedure to install.

COOKING CONTROLS

1. Open fryer section door(s).
2. Remove connections to cooking controls.
3. Remove screws securing controls.
4. Remove cooking controls.
5. Disconnect lead wires from the component
being replaced then remove from control box.
6. Reverse procedure to install and check for
proper operation.
DISCARD VALVE SWITCH
(KLEENSCREEN FRYERS ONLY)
1. Open the fryer section doors above filter pan.
Page 5 of 36 F25377 (March 2010)