Selectype Menus - Epson EPL-N1600 Reference Manual

SelecType menus

This section gives a brief description of the menus in SelecType
and lists the item settings available on each menu.
Test Menu
These settings select and begin the printer's internal test print.
You can obtain information on the printer's current settings,
available fonts, and a brief summary of features. You should also
see "Test menu", page 5-16 for further details.
Status Sheet, ESC/Page Font Sample, LJ4 Font Sample, FX
Font Sample, I239X Font Sample, PS Status Sheet
Sample*, PS Fact Sheet*
* Only available when the optional EPSONScript Level 2 is installed
Emulation Menu
These settings select the default emulation for each of the printer's
interfaces. See "Emulation menu", page 5-17 for further details.
Parallel, Serial, Aux
* Only available when the optional Type B interface is installed.
Printing Menu
These settings are the settings you will probably change most
often in everyday use. Most can be set by software, and for that
reason we advise you to check your software settings, because the
software settings will override these Printing Menu settings. See
"Printing menu", page 5-17 for further details.
Paper source, Page Size, Wide A4, Orientation, Out Bin,
Copies, Manual Feed, Resolution, Skip Blank Page, Duplex
Binding*, Start Page*
* Only available if the optional duplex unit has been installed.
5-10
SelecType
*
*
, PS Font
*
,