Epson EPL-N1600 Reference Manual page 92

Enter
(Status Sheet)
Form Feed
Continue
(Reset)
5-6
SelecType
Selects the corresponding OneTouch mode
option listed above this button, or accepts
the setting currently shown on the display
as a new setting when in SelecType mode.
Press this button two times when the printer
is on line to print the status sheet.
When the printer is off line, and data
remains in the printer's buffer memory
(the Form Feed light is on), pressing this
button prints out the data and clears the
buffer.
Enables the printer to resume printing after
certain maintenance-required conditions or
errors have been cleared. If the Continue
light is flashing, read the status or error
message on the display and correct the
problem as described in Chapter 6. If used
in combination with the ALT button, the
printer is reset.