Selectype Menus - Epson STYLUS PRO 9000 User Manual

6. Exit the SelecType mode
Press the Pause button.
Note:
To exit the SelecType mode at anytime, press the Pause button.
To return to step 2, press the SelecType button. Press the
SelecType button again to exit the SelecType mode.

SelecType menus

The six SelecType menus are described below.
"Printer Setting menu (PRINTER
SETTING MENU)" on page 19
"Test Print menu (TEST PRINT
MENU)" on page 21:
"Printer Status menu (PRINTER
STATUS MENU)" on page 22
"Paper Configuration menu
(PAPER CONFIG. MENU)" on page
22
"Cutter Replacement menu
(CUTTER REPLACE MENU)" on
page 22
"Head Alignment menu (HEAD
ALIGNMENT MENU)" on page 23
Various printer settings are
available.
You can print a nozzle check
pattern and status sheet.
You can see the firmware version,
total prints since delivery, and ink
cartridge/parts life, on the LCD.
You can register the paper
thickness and ink drying time, and
select the specified value.
Follow this menu when you
replace the cutter. For details, see
"Replacing the Paper Cutter" on
page 109.
You can correct any head
misalignment to obtain optimum
printing results. For details, see
"Performing the head alignment"
on page 24.
The Control Panel
18