Removing a ROM Module
1. Perform steps 1 through 7 in "Installing memory module"
section to access the printer's RAM slots.
2. Push the metal switch to release the ROM module.
Optional Interfaces
This section describes how to install the optional interface cards
listed below.
To add a direct connection to an Ethernet system, use an optional
Ethernet Card (C82357 /C82362 /C82363 )
To add a serial or parallel interface to your printer, use one of the
following:
32KB Serial Interface Card
32KB Parallel Interface Card C82310
To add a direct connection to an IBM mini or mainframe system,
use one of the following:
Coax Interface Card
Twinax Interface Card
3-36
Options
C82307
C82314
C82315