Genie Z-34/22 Operator's Manual page 27

Second Edition • Ninth Printing
Drive Enable
Light on indicates that the boom has moved past
either non-steer wheel and the drive function has
been interrupted.
To drive, hold the drive enable switch up or down
and slowly move the drive control handle off
center.
Be aware that the machine may move in the
opposite direction that the drive and steer controls
are moved.
Always use the color-coded direction arrows on
the platform controls and the drive chassis to
identify the direction the machine will travel.
Low Battery Indicator Light
Flashing light indicates battery power is low and
the batteries need to be charged. There is
adequate power left to lower the boom and move
the machine to a location where the batteries can
be charged.
Light on indicates the batteries are fully discharged.
Stop using the boom and charge the batteries
immediately.
Note: Machines equipped with Low Voltage
Interrupt Option will lose primary and secondary
boom lift functions when batteries are fully
discharged.
Part No. 43654
After Each Use
1 Select a safe parking location—firm level
surface, clear of obstruction and traffic.
2 Lower the boom to the stowed position.
3 Rotate the turntable so that the boom is
between the non-steer wheels.
4 Turn the key switch to the off position and
remove the key to secure from unauthorized
use.
5 Chock the wheels.
6 Charge the batteries.
Genie Z-34/22 & Genie Z-34/22N
Operator's Manual
OPERATING INSTRUCTIONS
25