Maintenance - Genie Z-34/22 Operator's Manual

Operator's Manual

Maintenance

Observe and Obey:
Only routine maintenance items specified in
this manual shall be performed by the operator.
Scheduled maintenance inspections shall be
completed by qualified service technicians,
according to the manufacturer's specifications
and the requirements specified in the
responsibilities manual.
Maintenance Symbols Legend
The following symbols have been
used in this manual to help
communicate the intent of the
instructions. When one or more of
the symbols appear at the
beginning of a maintenance
procedure, it conveys the meaning
below.
Indicates that tools will be required
to perform this procedure.
Indicates that new parts will be
required to perform this procedure.
12
Check the Hydraulic Oil Level
Maintaining the hydraulic oil at the proper level is
essential to machine operation. Improper hydraulic
oil levels can damage hydraulic components. Daily
checks allow the inspector to identify changes in
oil level that might indicate the presence of
hydraulic system problems.
1 Be sure that the boom is in the stowed position.
2 Check the hydraulic oil level.
Result: The hydraulic oil level should be at the
FULL
glass or between the
hydraulic tank.
3 Add hydraulic oil if necessary.
Hydraulic Oil Specifications
Hydraulic oil type
Genie Z-34/22 & Genie Z-34/22N
Second Edition • Ninth Printing
mark on the dipstick or visible in the sight
and
FULL
Refer to machine decal
marks on the
ADD
Part No. 43654