Photos; Basic Recording; Taking Photos - Canon VIXIA HF200 Instruction Manual

Photos
Refer to this chapter for details on shooting photos - taking
photos and playing them back, capturing photos from video
and printing photos.
Basic Recording
Taking Photos
I
1 Set the camera mode dial to _ or I(3_
PHOTO
_"I_ P HOTO
2 Turn on the camcorder.
By default, photos are
recorded in the built-in memory. You
can set the memory card as the
recording media for photos (IZ3 42).
3 Press _T6] halfway.
Once the focus is automatically
adjusted, _ will turn green and one
or more AF frames will appear.
4 Press _ fully.
The ACCESS indicator will flash as the photo is being recorded.
_[_ IMPORTANT
• Observe the following precautions while the ACCESS indicator is on or
flashing. Failing to do so may result in permanent data loss.
- Do not open the memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder's operating mode.
90 * Photos