Canon VIXIA HF200 Instruction Manual page 158

This scene was recorded usinganother deviceand cannotbe added to the playlist.
- Scenes that were not recordedwith this camcorder cannot beadded to the playlist.
This scene was recorded using another device and cannot be copied.
- Scenes that were not recordedwith this camcorder cannot becopied to the memory card.
Too many photos. Disconnect the USBcable.
- Disconnectthe use cable. Try using a memory card reader or decreasethe number of photos
on the memory card to fewer than 2,500 photos.
- If a dialog box appeared on the computer screen, close it. Disconnectthe USBcable, and
restore the connection after a short while.
Transferorder error
- Youattempted to set more than 998 transfer orders.Reducethe number of photos marked
with transfer orders.
Unable to recognize the data
- Youtransferred data to the camcorder recorded in a different television system (PALor
SECAM).
Unable to recover data
- Could not recover a corrupted file.
Messages Related to the Optional DW-IO0 [)V[) Burner
If an error message appears while the camcorder is connected to the
optional DW-1 O0 DVD Burner, refer to the following section and also to
the instruction manual of the DVD Burner.
Cannot read the disc. Check the disc.
- During disc recording mode,this message can appear when a commercially available DVD
disc (a DVDdisc containing movies, software, etc.) or an 8 cm mini DVDdisc is inserted.
- During disc playbackmode,this message can appearwhen a commercially available DVD
disc or a brand new DVDdisc is inserted.
Close the memory card slot cover
- The memory card slot coveris open. Closethe cover after correctly inserting the memorycard
(_CJ 42).
Connect the compact power adapter
- The camcorder is beingpoweredby the battery pack.Connect the compact power adapter to
the camcorder.
Disc access failure. Check the disc.
- There was an error when reading the disc or attempting to write onto it.
- This message can appearalso if condensationhas formed (_ 167). Wait until the DVD
burner dries completely before resuming use.
- The disc may not be loaded correctly. Try removingthe disc and reinserting it.
158 * Additional information