Canon VIXIA HF200 Instruction Manual page 37

Selecting an Option from the FUNC. Menu
The following is an example of selecting a FUNC. menu option in
mode (the operation is similar in _ mode). In playback modes, the
operation varies depending on the function selected so refer to the rel-
evant chapter as necessary.
1 Press _.
2 Select (_,Y) the icon of the function
you want to change from the left _0
side column.
Menu items not available will appear _,
grayed out. _3_
3 Select (4_) the desired setting from the available options at the
bottom bar.
• The selected option will be highlighted in orange.
• With some settings you will need to make further selections and/or
press Q. Follow the additional operation guides that will appear on
the screen (such as the icon, small arrows, etc.).
4 Press _€-ONCI_ t o save the settings and close the menu.
You can press _ to close the menu at any time.
Selectingan Optionfrom the Setup Menus
1 Press I_NC_i. _
2 Select (AY, 411_) [_ Menu] and
press Q to open the setup _©
menus.
You can also hold _FdN_I pressed
down for more than 1 second or
press [ME_O_ on the wireless
controller to open directly the setup
menus screen.
3 Select (4_) the tab of the desired menu.
4 Select (AT) the setting you want to change and press _.
• The orange selection bar indicates the menu setting currently
selected. Menu items not available appear grayed out.
Preparations * 37