Canon VIXIA HF200 Instruction Manual page 159

Error reading the data
- An error occurred while reading the recordingsfrom the camcorder.
- Check that the USBcable was not accidentally disconnected.
No disc
- Insert a disc intothe DVDBurner.
- This message can appearalso if condensation hasformed (_ 167). Wait until the DVD
burner dries completely before resuming use.
No photos
- There are no photos to add to the disc.
No scenes
- There are no scenesto add to the disc.
No scenes left to add
- There are no scenesthat have not already been addedto discs created previously.
No transfer orders
- No photos have been marked with transfer orders (1_3 131).
Operation canceled
- The USBcable was disconnected and the operationwas canceled. Checkthe USBconnection.
- The scenes selected to be written on the disc include scenes recordedin MXPmode. Addto
the playlist in advanceonly those scenes recordedin other recording modes and selectthe
[Playlist] option to createthe disc.
Reading the disc
- Reading data from the disc.
Unable to recover data
- Could not recovera corrupted file.
Direct Print RelatedMessages
Cannot print this photo
- Youattempted to print a photo that was recordedwith another camcorder, has a different
compression, or was edited on a computer.
Cannot trim this photo
- Youattempted to trim a photothat was recorded with another camcorder.
Check pdnt settings
- Current print settings cannot be used for printing with the _ _ button.
Data transfer error
- The printer is experiencing a data transfer error. Cancelprinting, disconnectthe USB cable
and turn off the printer.After a while, turn the printer back on and reconnect the USB cable.
Whenyou are printing using the _ _ button, check the print settings.
Additional Information ," 159