Basic Recording; Taking Photos - Canon VIXIA HFS11 Instruction Manual

Photos
Refer to this chapter for details on shooting photos - taking
photos and playing them back, capturing photos from video
and printing photos.
Basic Recording
Taking Photos
Operating modes:
I
.(J.] [
Q ]
I .
I
PHOTO PHOTO
W
ON/OFF(CHG)C)
(~)
1 Set the camera mode dial to 0 or
·iJ·
2 Turn on the camcorder.
By default, photos are recorded in the
built-in memory. You can set the
memory card as the recording media
for photos (CO 40).
3 Press
[PHOTO]
halfway.
Once the focus is automatically
adjusted,
8
will turn green and one
or more AF frames will appear.
4 Press
[PHOTO]
fully.
The ACCESS indicator will flash as the photo is being recorded.
o
IMPORTANT
• Observe the following precautions while the ACCESS indicator is on or
frashing. Failing to do so may result
in permanent data
(ass.
- Do not open the memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder's operating mode.
Photos •
91