Canon VIXIA HF200 Instruction Manual page 106

CopyingPhotosfrom the IndexScreen
Options
[AH Phetes] Copies all the photos.
_is Phete] Copies only the photo marked with the orange selec-
tion frame.
[$e|ected Phetes] Copies all the photos selected in advance
(marked with a ./checkmark). Refer to Pre-se/ecting Recordings
from the Index Screen (C_.3 57).
1 Open the index screen of the photos recorded in the built-in
memory.
Move the zoom lever toward W and then select the f_ tab under the
6 icon (_ 52).
2 Select (AY, 4_) the photo you want to copy.
This step is not necessary to copy all photos or previously selected
photos.
3 Copy the photo(s).
0 [_. Copy (1_._)] 0 Desired option 0 [Yes]* 0 [OK] 0
!FuNc./
* If you selected [Selected Photos] or [All Photos], you can press O to interrupt
the operation while it is in progress.
IMPORTANT
• Observe the following precautions while the ACCESS indicator is on or
flashing. Failing to do so may result in permanent data loss.
- Do not open the memory card slot cover.
- Do not disconnect the power source or turn off the camcorder.
- Do not change the camcorder's operating mode.
(_) NOTES
• If there is not enough space on the memory card, as many photos as
possible will be copied before stopping the operation.
• If the memory card slot cover is open, or the LOCK switch on the mem-
ory card is set to prevent writing, you will not be able to copy photos to
the memory card.
106 * Photos