Canon VIXIA HF200 Instruction Manual page 46

- Do not o pen t he memory card slot cover.
- Do not d isconnect the power source or turn off t he camcorder.
- Do not c hange the camcorder's operating mode.
• Be sure t osave y our recordings regularly (C13 121), especially after mak-
ing important recordings. Canon shall not b eliable forany l oss o rcor-
ruption ofdata.
(_ NOTES
•
Aboutthe PowerSavemode: If [_ O [Power Saving Mode] is set to
[ _ On] (C13143), the camcorder will shut off automatically to save
power when it is powered by a battery pack and is left without any
operation for 5 minutes. Press /i_SWERj t o turn on the camcorder.
• When recording in bright places, it may be difficult to use the LCD
screen. In such cases, you can turn on the LCD backlight (EZ332) or
adjust the brightness of the LCD screen (B3 141) accordingly.
The camcorder offers 5 recording modes. Changing the recording
mode will change the recording time available on the memory. Select
MXP or FXP mode for better movie quality; select LP mode for longer
recording times. The following table gives approximate recording
times.
!!!! } !i @ i l
(EJ3 34)
I_i O [SP
Standard Play 7 Mbps] O Desired recording mode O
(_ NOTES
• AVCHD discs containing scenes recorded in MXP mode cannot be cre-
ated with the optional DW-100 DVD Burner. Use the software on the
supplied Video Tools CD-ROM to back up such scenes.
• The camcorder uses a variable bit rate (VBR) to encode video so the
actual recording times will vary depending on the content of the scenes.
• The camcorder retains the last setting used even if you set the cam-
corder to _ mode.
* Video