4 Replacement Procedures
4.27
LCD Modules
NOTE: ICs are fragile. Use extreme care not to apply pressure to the ICs along the edges of
the LCD module.
NOTE: Dispose of used LCD panels (fluorescent (FL) tubes) as required by local ordinances
or regulations.
NOTE: The LCD/FL cable must be carefully peeled away before disconnecting it from the
module.
Removing the 17.1-inch LCD module
Remove the 17.1-inch LCD module according to the following procedures and Figures 4-41,
4-42.
1. Remove six M2.5x6 screws on the top of the LCD bracket.
2. Remove six M2x3 screws on two sides of the LCD (three on each side).
Qosmio X300 Maintenance Manual
Error! Style not defined. Error! Style not defined.
4-62