Cooling Module Removal - Toshiba Satellite 1130 Series Manual

FIELD REPLACEABLE UNIT DOCUMENTATION

COOLING MODULE REMOVAL

1. Turn the computer upside down.
2. Remove two M2.5x3 black torx screws and
securing the modem cover.
3. Remove the cpu cover.
CPU REMOVAL
Silicone grease
1. Insert a flat head screwdriver to the CPU lock
and rotate it counter-clockwise to unlock the CPU.
2. Lift out the CPU.
1130 Series
CPU cover
M2.5x4 black torx screws
Close
CPU lock
Open
CPU
TOSHIBA
Tough Enough for Today's World
TM
Satellite
M2.5x5 silver flat head screws
4. Disconnect the fan cable from JP24 on the
system board.
5. Remove four M2x5 silver flat head screws
securing the cooling module.
6. Lift out the cooling module.
KEYBOARD REMOVAL
1. Open the display panel.
2. Using the case separator, unlatch the keyboard
holder as shown above.
Cooling module
Fan cable
JP24
Keyboard holder