Fdd Troubleshooting; Procedure 1 Fdd Head Cleaning Check; Procedure 2 Diagnostic Test Program Execution Check; Procedure 3 Connector Check And Replacement Check - Toshiba SATELLITE M30-35 Series Maintenance Manual

2.5 FDD Troubleshooting

2.5 FDD Troubleshooting
This section describes how to determine if the FDD is functioning properly. Perform the
steps below starting with Procedure 1 and continuing with the other procedures as required.
Procedure 1: FDD Head Cleaning Check
Procedure 2: Diagnostic Test Program Execution Check
Procedure 3: Connector Check and Replacement Check
Procedure 1 FDD Head Cleaning Check
FDD head cleaning operation details are given in Chapter 3, Tests and Diagnostics.
Insert the Diagnostics Disk in the computer's floppy disk drive, turn on the computer and run
the test. Clean the FDD heads using the cleaning kit. If the FDD still does not function
properly after cleaning, go to Procedure 2.
If the test program cannot be executed, go to Procedure 3.
Satellite M30-35 Maintenance Manual (960-455)
2 Troubleshooting Procedures
2-31