Toshiba SATELLITE M30-35 Series Maintenance Manual page 191

4 Replacement Procedures
3. Push the tab of the HDD pack to the direction of the arrow and remove the HDD
pack. Be careful not to damage the connector.
NOTE: The following steps describe how to disassemble the HDD pack; however, do not
disassemble if the HDD is working properly.
4. Remove the following screws.
• M3×4S
5. Remove the HDD bracket.
CAUTION: Do not apply pressure to the top or bottom of the HDD.
6. Remove the HDD from the aluminum laminate.
Aluminum laminate
M3×4S FLAT HEAD
Figure 4-5 Removing the HDD bracket and HDD
4-14
FLAT HEAD screw
×4
M3×4S FLAT HEAD
HDD
Satellite M30-35 Maintenance Manual (960-455)
4.5 HDD
HDD bracket