4.19 CPU
CAUTION: Silicon grease is applied between the fin and the CPU. When removing the
fin, be careful not to damage the CPU under the fin.
4. Unlock the CPU by rotating the cam on the CPU socket 180 degrees
counterclockwise with a flat-blade screwdriver (in the order shown in the figure
below).
5. Remove the CPU.
Satellite M30-35 Maintenance Manual (960-455)
M2×4B BIND
Figure4-28 Removing the CPU holder and fin
Cam
Figure 4-29 Unlocking the CPU
4 Replacement Procedures
CPU holder
FIN
4-51