Toshiba SATELLITE M30-35 Series Maintenance Manual page 251

4.28
LCD cable/Wireless LAN Antenna/Hinge
10. Secure the wireless LAN antenna with the three copper sheets and the gasket.
Standard for sticking position of copper sheets (right , left)
Fit the copper sheet to the
hole edge of the LCD cover.
5 ± 4 mm
Copper sheet
Figure 4-50 Sticking the copper sheets and gasket
11. Set the LCD cable holder on the back and secure it with the following screw.
• M2.5×5B
12. Set the Cable holder on the front and secure it with the following screw and the
insulator.
• M2.5×4B
12. Place the hinge caps.
Satellite M30-35 Maintenance Manual (960-455)
The copper sheet shall not
be over the edge of the wall
of LCD cover.
FLAT HEAD screw
FLAT HEAD screw
4 Replacement Procedures
Standard for sticking position of gasket
2.5 ± 2 mm
Sticking side of gasket
(wall of LCD cover)
Stick the gasket securely so
that it fits the copper tape.
×1
×1
gasket
4-75