Toshiba SATELLITE M30-35 Series Maintenance Manual page 207

4.10 Switch cover ASSY/Switch membrane
Installing the Switch cover ASSY/Switch membrane
To install the Switch cover ASSY/Switch membrane, follow the steps below and refer to
figure 4-13 and 4-14.
1. Place the switch membrane with the right side under the guides and secure it with
the following screws.
• M2.5×4B FLAT HEAD screw
2. Connect the switch membrane cable to the connector PJ7001 on the system board.
3. Stick the insulator to fix the switch membrane.
4. Install the switch cover ASSY and engage the right-side latches.
Satellite M30-35 Maintenance Manual (960-455)
4 Replacement Procedures
×2
4-31