Table of Contents
Advertisement
Engine does not start (Start failure)
Check the gasoline
in the tank
Yes
Oil warning lamp turns on
when the recoil is pulled
Fuel cock is in
the ON position
Yes
Gasoline leaks when the
carburetor drain is loosened
Yes
Check for
gasoline corrosion
OK
Remove the spark plug*
and check the electrode
Attach the plug to the plug
cap, and check for sparks
by grounding the electrode
Sparks
Check the valve clearance
of the compressed pressure
(compression)
Spark Plug - BMR4A (NGK)
* NO SUBSTITUTIONS - WILL EFFECT
PERFORMANCE OR OPERATION.
None
Add gasoline
warning
lamp is on
Check the
oil volume
NO
Confirm of the oil SW
Open
the cock
E/g
NO
Clean,
change
the filter
Corrosion
Change
gasoline
Dry
Blockage of the fuel tube
carburetor, such as noise, etc.
Check for dirty plugs, or gap
No spark
Check the connection
(coupler, high tension cord)
NG
Adjustment
– 44 –
Add oil (up to the
rated volume)
Resistance
value 0
GND
Tester
Change the Inverter unit
Change Oil SW
Check the
ignition coil
Check the
pulsar coil
OK
Change
the unit
Hide quick links:
Advertisement
Table of Contents
