Reassemble Procedures - Robin America R1700i Service Manual

5-4) REASSEMBLY PROCEDURES
5-4-1 Cylinder baffle
Install the cylinder baffle. (Tighten together)
M8 x 16mm Flange bolt : 3pcs.
Tightening torque : 11.0-13.0 N m
M6 x 12mm Flange bolt : 1pce.
Tightening torque : 7.0-9.0
5-4-2 Ignition coil
Install the ignition coil into the ignition coil bracket and
attach it to the engine.
Ignition coil tightening torque
Tightening torque : 3.0-5.0
Ignition coil bracket tightening torque
M6 x 14mm Flange bolt : 1pce.
Tightening torque : 7.0-9.0
M8 Flange nut : 1pce.
Tightening torque : 11.0-13.0 N m
5-4-3 Muffler
Install the muffler.
M8 x 80mm Flange bolt : 1pce.
Tightening torque : 11.0-13.0 N m
M6 Flange nut : 2pcs.
Tightening torque : 7.0-9.0
110-130 kgf cm
(8.1-9.6 ft lbs)
N m
70-90 kgf cm
(5.2-6.6 ft lbs)
N m
30-50 kgf cm
(2.2-3.7 ft lbs)
N m
70-90 kgf cm
(5.2-6.6 ft lbs)
110-130 kgf cm
(8.1-9.6 ft lbs)
110-130 kgf cm
(8.1-9.6 ft lbs)
N m
70-90 kgf cm
(5.2-6.6 ft lbs)
Cylinder baffle
Muffler
– 27 –
Ignition coil