(4) RECEPTACLE, AC PLUG
Check burn marks in the areas where electric current flows, such as wire and plastic parts of AC receptacle.
(5) OIL SENSOR
Confirm that there is a sufficient amount of
oil.Measure continuity between the wires of oil
sensor and the crankcase using a circuit tester.
Below the lower level : ON (continuity)
Above the lower level : OFF(non-continuity)
Use 4-stroke automotive detergent oil of API service
class SE or higher Grade (SG, SH or SJ is
recommended).
Oil capacity : 0.4 liters
0
– 17 –
Oil Sensor