Table of Contents
Advertisement
5-4-7 Pulsar coil and grommet
Tighten the bolt in place, making adjustments according
to 5-4-6.
M6 x 8mm Flange bolt : 2pcs.
Tightening torque : 3.0-5.0
Place the pulsar coil wires along the groove of the
grommet and recoil guide to make it easier to assemble
the blower housing.
Caution : Do not forget to put the 2 pieces of pipe knock.
5-4-8 Blower housing
Install the blower housing
M8 x 55mm Flange bolt : 1pce.
M8 x 90mm Flange bolt : 3pcs.
Tightening torque : 18.0-20.0 N m
NOTE: Insert the grommet (pulsar coil harness) and
recoil guide into the blower housing securely.
N m
30-50
kgf cm
(2.2-3.7
ft lbs)
180-200
kgf cm
(13.3-14.8 ft lbs)
Recoil guide
Flywheel
Blower
housing
– 29 –
Pulsar coil
Grommet
Pulsar coil harness
Hide quick links:
Advertisement
Table of Contents
