5-4-23 Choke wire and rolling wire
Install the choke wire into the choke shaft of the
carburetor.
NOTE: Use the engine switch to confirm that the
choke can be fully closed, and fully opened.
Install the rolling wire into the wire plate and fuel cock
behind the control panel.
5-4-24 Rear cover
Attach the rear cover to the case body.
M6 x 30 Screw and Washer : 4pcs.
Tightening torque : 3.0-4.0
5-4-25 Side panels (left and right)
Attach the side panel (left and right) to the case body.
M6 x 16.5mm Bolt : 2pcs.
This is the end of assembly procedures.
N m
30-40
kgf cm
(2.2-2.9 ft lbs)
Rear cover
Side Panel
– 35 –
Choke wire
Rolling wire