Table of Contents
Advertisement
5-4-15 Fuel pipe
Connect the fuel pipes from the fuel pump to the
crankcase and carburetor and fasten with a hose clamp.
NOTE: Assemble with care.
Avoid mis-connection of fuel pipes.
5-4-16 Inverter unit
Attach the inverter unit into the front frame.
A grounding wire shall be tightened together to the upper
right side of the inverter unit.
M6 x 20mm Flange bolt : 4pcs.
Tightening torque : 3.0-4.0
5-4-17 Installing coupler
Connect the harness of the control panel, and inverter unit.
Be sure to securely fasten the couplers of the harness
before installing the control panel.
NOTE: When fastening, make sure there are no
mis-wiring of harness, or forgotten wiring.
N m
30-40
kgf cm
(2.2-2.9 ft lbs)
Fuel pipe
(Crank case side)
– 32 –
Fuel pipe
(Carburetor side)
Inverter
unit
Couplers
Hide quick links:
Advertisement
Table of Contents
