Tools Required; Install The Display Console - Star Trac Fitness S-TR Owner's Manual

A
SSEMBLY AND
Use the following procedures to unpack and assemble your STAR TRAC S SERIES TREADMILL. Assembly procedures
are the same for all S SERIES TREADMILLS.
UNPACKING
Open the shipping carton, remove all parts from the carton and foam inserts, and verify that the following parts are included
in your shipment:
Description
Base Assembly
Neck (and Shroud)
Neck Shroud
Display Console Assembly
Handrail
Bolt, Allen Head, M10 X 20
*Used for shipping only.
**Pre-installed on base assembly.

TOOLS REQUIRED

Most STAR TRAC treadmills can be assembled using the following tools:
Metric Hex Key Wrenches
Metric Open-End Wrenches
Metric Ratchet Socket Wrench Set
Torque Wrench
Your STAR TRAC S SERIES TREADMILL includes a hex key set and combination open-end wrench.
ASSEMBLY
1. Unpack and Position the Base Assembly
CAUTION: The motor end of the base assembly is very heavy. Two people may be needed to lift this end when moving
the base assembly.
Remove all packaging material so the base assembly is sitting on the shipping crate platform. With a helper, lift the
base assembly from the shipping crate platform, and place it in the location where it will be used. Be sure the
selected location is level, and close to a power outlet.

3. Install the Display Console

STAR TRAC S SERIES TREADMILLS O
S
ETUP
Qty
1
1
1
1
2
8
' M
WNER S ANUAL
Description
Lockwasher, D=10
Hex Nuts*
Bolt, Allen Head, M6 X 50
Screw, Hex Head, M10 X 140**
Bolt, Allen Head, M6 X 25
Lockwasher, D=6
Channel Lock Pliers
Vice Grip Pliers
Rubber Mallet
Phillips Head Screwdriver
Qty
8
4
4
4
2
4
19