Tools Required - Star Trac E-TRx Work Instructions

Before using this product, it is essential to read ALL installation Instructions and this
ENTIRE operations manual; the manual describes equipment setup and instructs
members on how to use it correctly and safely.
1. Hex (Allen) key, 1/4" (Included)
2. Hex (Allen) key, 5/32" (Included)
3. Screwdriver (blade-tip), 3/32" (Included)
4. Screwdriver, Philips, #2 (Included)
5. Torque wrench (not included)
If you are a Factory Certified Installer you must:
Adhere to all torque and assembly specifications.
•
Use a CALIBRATED TORQUE WRENCH with the necessary hex key sockets
•
NOT USE a powered drill, powered driver or powered impact tool for any part of the assembly.
•
Complete the assembly checklist is completed on each Star Trac product.
•
Complete the final programming, functional and cosmetic checklists for each Star Trac product.
•
Copyright 2008. Star Trac by Unisen, Inc. Star Trac Fitness, Star Trac®, and the Star Trac Logo are registered trademarks of Unisen Inc. All rights
reserved, including those to reproduce this book or parts thereof in any form without first obtaining written permission from Star Trac.
iPod is a registered trademark of Apple, Inc.
®
MYE is a registered trademark of MYE Entertainment LLC.
®
Every effort has been made to keep this information current; however, periodically, changes are made to the information herein, and these changes
will be incorporated into new editions of this publication. All product names and logos are trademarks of their respective owners. Printed in the USA.
3
GENERAL

TOOLS REQUIRED

FACTORY CERTIFIED INSTALLER
620-7920 Rev A