Adjusting The Focus And Zoom - Panasonic PT-EX12KU Operating Instructions Manual

Projecting

■ Adjusting the focus and zoom

■
1) Press the <FOCUS> button and the <ZOOM> button on the remote control or the
control panel.
■
z [Focus] and [Zoom] are displayed on the screen for four seconds.
2) While [Focus] and [Zoom] are displayed, press the <FOCUS> button and <ZOOM>
button on the remote control or press ▲▼ on the control panel to adjust the focus
and zoom.
Note
■
z When [Display] is set to [Off], the adjustment screen will not appear.
■
z It is recommended that the images are projected continuously for at least 30 minutes before the focus is
adjusted.
■
z If the keystone effect occurs, refer to "Correcting the keystone effect" (
46 - ENGLISH
page 48) for details.
