[Digital Zoom -]; [Keystone] - Panasonic PT-EX12KU Operating Instructions Manual

[Digital zoom -]

This mode can only be adjusted for computer inputs.
1) Press ▲▼ to select [Digital zoom -].
2) Press the <ENTER> button.
■
z The menu screen is cleared and [D. zoom -] is
displayed.
3) Press the <ENTER> button.
■
z Each press of the button reduces the image.
z Press ▲▼◀▶ to move the image. ■
■
z The image move function only works when the
image size is larger than the panel resolution
*1: The panel resolution of the projector is 1 024 x 768 dots.
Note
■
z When there is no input signal, [Digital zoom -] is
grayed out and cannot be selected.
■
z When [True] is selected, [Digital zoom -] cannot be
selected.
■
z When [Custom] is selected, you cannot set [Digital
zoom -] to [Normal] or smaller.
■
z When [Store] registered in the [PC adjust] menu is
selected in [System] of the [Input] menu, the image
move function of [Digital zoom -] may not work
correctly.
■
z When VGA, SVGA, SXGA, WXGA, or UXGA is
selected in [System] of the [Input] menu and the
upward [Keystone] adjustment is at the maximum
value, [Digital zoom -] may not work correctly.
■
z To end the [Digital zoom -] operation, press any
button other than the <D.ZOOM>, <ENTER>, and
▲▼◀▶ buttons.

[Keystone]

1) Press ▲▼ to select [Keystone].
2) Press the <ENTER> button.
■
z The sub menu 2 is displayed.
3) Press ▲▼ to select.
■ [Standard] ■
Corrects the keystone effect vertically and
horizontally.
*1
1) Select [Standard], and press the
<ENTER> button.
■
z The menu screen is cleared and [Keystone] is
displayed.
2) Press ▲▼◀▶ to correct the corner.
■ [Corner correction] ■
Corrects distortion at the corners of the image.
1) Select [Corner correction], and press
the <ENTER> button.
■
z The screen to select the corner to correct is
displayed.
2) Press the <ENTER> button to select
the corner to correct.
Keystone
Keystone
3) Press ▲▼◀▶ to correct the corner.
[Screen] menu
Keystone
Keystone
<ENTER>
button
Keystone
ENGLISH - 67