Panasonic PT-EX12KU Operating Instructions Manual page 81

■ [Effect] ■
Sets special effects when shutter is opened and
closed.
1) Select [Effect], and press the <ENTER>
button.
2) Press ▲▼ to switch the setting.
[Off] [L 1]
[Off] Does not set special effects.
Sets fade in and fade out when the
[L 1]
shutter is opened and closed.
Sets slower fade in and fade out
[L 2]
than L1.
■ [Release key] ■
Sets the release button when shutter is closed.
1) Select [Release key], and press the
<ENTER> button.
2) Press ▲▼ to switch the setting.
[Any]
The shutter function is canceled by
pressing any button on the remote
[Any] control or projector body, and the
function of the pressed button is
executed.
Only the <SHUTTER> button on the
[SHUTTER] remote control or the control panel
can be canceled.
Note
■
z If the power is turned on again after the power is
turned off during the setting or the lamp is turned off
with the [Management] setting, the shutter function
is canceled.
■
z The setting of the selected item is enabled.
■ [Management]
1) Select [Management], and press the
2) Press ▲▼ to select.
[L 2]
Note
■
z When the management function is active, the lamp
is turned off and the projector will begin a cooling
operation.
■
z When cooling has finished, the power of the
projector body is turned off and the standby
indicator <STANDBY> turns on.
■
z The shutter indicator <SHUTTER> begins flashing
in blue as the cooling operation begins.
■
z The flashing continues after the cooling has
finished and the standby indicator <STANDBY> has
turned on.
■
z The flashing stops when the projector power is
turned on again.
■
z The power management function does not work
when the image is blocked by the [Shutter].
■
z The factory default setting is "180 minutes".
■
z You can set the time while the function cannot be
set to off.
[SHUTTER]
[Setting] menu
■
Sets a time between closing of the shutter and the
lamps turning off.
<ENTER> button.
■
z You can set times from 5 - 480 minutes.
ENGLISH - 81