About indicator status
■ When operating correctly
■
The status of the indicator is displayed with the following symbols.
s: Off, ●: On, H: Flashing, ■: On or Flashing
<POWER>
<STANDBY>
Green
Red
s
s
s
●
●
s
*2
s
H
*2
H
●
*2
*2
H
H
●
s
s
●
*2
s
H
*1: The indicator will turn on or flash under certain conditions, regardless of the status of other indicators.
*2: The indicator will flash in approximately 1-second intervals.
88 - ENGLISH
Indicator
<WARNING
<WARNING
<SHUTTER>
TEMP.>
FILTER>
Blue
Red
Orange
s
s
s
*1
*1
*1
s
■
■
*1
*1
s
■
s
*1
*1
*1
s
■
■
*1
*1
s
■
s
*1
*1
s
■
s
*1
*1
s
■
●
*1
*2
s
■
H
*1
*2
s
■
H
<LAMP 1
REPLACE>/
Status of the projector
<LAMP 2
REPLACE>
Orange
The power plug has been removed from the outlet.
s
The projector is in the standby mode.
Turns on when pressing the power <POWER ON>
*1
■
button on the remote control or the power
button on the control panel.
The projector is operating normally.
*1
■
The lamp is cooling down.
The projector does not turn on when pressing the
power <POWER ON> button on the remote control or
*1
■
the power
standby indicator <STANDBY> changes to on.
The projector is in the power management mode.
The lamp will turn on when controlling the projector,
*1
■
allowing the user to start operating it.
Power management mode is ON and the lamp is
*1
■
cooling down.
The shutter function has been turned on.
Press any button on the remote control or the control
*1
■
panel to cancel the function.
The projector is in the shutter management mode.
The lamp will turn on when controlling the projector,
*1
■
allowing the user to start operating it.
Shutter management mode is on and the lamp is
*1
■
cooling down.
button on the control panel until the