Palm Treo 700wx Using Instructions page 204

9
C U S T O M I Z I N G Y O U R S M A R T P H O N E
reports—provided your computer is
connected to the Internet. If you use your
wireless provider network to send an error
report, data transfer charges apply.
1 Press Start
2 Select the System tab, and then select
Error Reporting
3 Select whether you want to enable or
disable error reporting.
4 Press OK
This error-reporting method meets the
TIP
privacy regulations of the European Union
(EU) as well as the Fair Information Practice
Principles of the Federal Trade Commission.
To view the Fair Information Practice
Principles, visit the Federal Trade Commission
website at www.ftc.gov/reports/privacy3/
fairinfo.htm.
Setting up a GPS device
If you purchased an optional Global
Positioning System (GPS) receiver, your
smartphone can show your exact location
on a map.
1 Press Start
196
S Y S T E M S E T T I N G S
and select Settings.
.
to finish.
and select Settings.
2 Select the System tab, and then select
GPS .
3 On the Programs tab, select the GPS
program port list, and then select the
port for applications to use to access
GPS info. This port must also be
selected in your GPS application's
configuration settings.
4 Select the Hardware tab.
5 Select the GPS hardware port list, and
then select the port to which your GPS
receiver is connected. This must be a
different port from the one you set in
step 3 as your program port. To connect
to the GPS device using Bluetooth
wireless technology, you must first set
up a partnership between the two
devices (see Setting up a Bluetooth
connection.)
6 Select the Access tab and check the
Manage GPS automatically box. This
setting lets more than one application
simultaneously access your GPS info.
7 Press OK to finish.