Table of Contents
Advertisement
How to Use This Guide
How to Use This Guide
Read through this guide completely to familiarize yourself with its contents and gain an
understanding of the features and capabilities of the stackable Ethernet switches. A
general knowledge of data communications networks is helpful when setting up the
switches.
This preface provides an overview of this guide and the SecureStack B2 manual set, a brief
summary of each chapter and defines the conventions used throughout this guide. To
locate information concerning various subjects in this guide, refer to the following table:
For...
An overview of the switch features and how to
obtain technical support
Network requirements that must be met before
installing the switch
Instructions to install the switch on a flat surface
or in a standard 19-inch rack and configure the
switch in a stacked configuration
Troubleshooting installation problems and
diagnosing network/operational problems using
the LANVIEW LEDs
Specifications, environmental requirements, and
physical properties of the switch and optional
Mini-GBICs
Related Documents
The manuals listed above can be obtained from the World Wide Web in Adobe Acrobat
Portable Document Format (PDF) at the following site:
http://www.enterasys.com/support/manuals
•
SecureStack B2 Configuration Guide describes how to use the Command Line Interface
(CLI) to set up and manage the B2 switches.
•
Cabling Guide provides information concerning network cabling, dB loss, and other
cabling specifications and usage.
Unlike the SecureStack B2 Configuration Guide, the Cabling Guide is not listed
alphabetically on the web site. Instead, it is under the Overview Guides link.
xvi About This Guide
Refer to...
Chapter 1,
Introduction
Chapter 2,
Network Requirements
Chapter 3,
Hardware Installation
Chapter 4,
Troubleshooting
Appendix A,
Specifications
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
