Setting Up A Firewall For The Central Admin Server; Configuring The Scanner Settings For Central Admin Management - Fujitsu ScanSnap N1800 Operating Manual

5.4.3 Setting up a Firewall for the Central Admin Server

This section describes the firewall settings for the Central Admin Server.
Set the following port number for communication in the Central Admin Server, to enable
management by the Central Admin Console.
Scanner Central Admin Server
Central Admin Console Central
Admin Server
For details about setting a firewall, refer to the manual for the relevant firewall.

5.4.4 Configuring the Scanner Settings for Central Admin Management

This section describes the scanner settings.
The following settings for connecting a scanner to the Central Admin Server are required
to enable management by the Central Admin Console.
[Admin Connection] window
For details, refer to
[Scanner Central Admin Server] window
For details, refer to
5.4 Pre-settings for Using Central Admin Console
From/To
"4.8.8 Setting the Admin Connection" (page
"4.8.9 Setting a Central Admin Server" (page
Protocol
HTTP/
HTTPS
(TCP)
HTTP/
HTTPS
(TCP)
240
Port Number
Port number set for scanner
communication
Port number set for Central
Admin communication
123).
125).