Fujitsu ScanSnap N1800 Operating Manual page 346

5. In the [Save as] field, enter a file name for the scanned data to be saved.
The following file names cannot be used:
\ and / are used as delimiters in a folder path.
The following symbols cannot be used.
: * ? " < > |
When the file format is changed in [Scan Settings], the file name set on the
[File Names (Save)] window is reset in the [Save As] field.
6. Press to select whether or not to overwrite an existing file with the
same name.
Whether or not the file was successfully saved can be checked in the user log.
For more details about accessing the user log, refer to
Log" (page 402).
7. Press the [Scan] button.
When [Scan Viewer] is [Off], this will be a [Scan&Save] button.
The scanning starts.
The scanning status and scan settings are shown during the scan.
The maximum number of pages that can be scanned is 999.
When [Blank Page Skip] is enabled, the number of scanned pages excluding
skipped blank pages is shown.
Additional pages can be scanned in place of skipped blank pages, until the
maximum number of scanned pages is reached.
When the scanning has completed, the [Scan Viewer] window appears.
For details about editing on the [Scan Viewer] window, refer to
Scanned Data in the Scan Viewer" (page
If the [Scan&Save] button is selected (when [Scan Viewer] is [Off]), the
scanned data is saved immediately after the scanning is completed, and the
LCD touch panel screen returns to the [Main Menu] window.
For details, refer to
8. Check the scanned data.
For more details about the [Scan Viewer] window, refer to
Scanned Data in the Scan Viewer" (page
6.7 Saving the Scanned Data to a Network Folder
CON
PRN
AUX
CLOCK$
NUL
COM0 to COM9
LPT0 to LPT9
"6.10 Enabling/Disabling the Scan Viewer" (page
346
"6.12 Checking the User
398).
"6.11 Editing the
398).
"6.11 Editing the
395).