Administrator Login: Via The Admin Tool - Fujitsu ScanSnap N1800 Operating Manual

4.2.3 Administrator Login: via the Admin Tool

The Admin Tool can be set up to manage the scanner via a computer.
This section explains how to login using the Admin Tool.
When an administrator or user is already logged into a scanner, login via the Admin Tool
is not possible.
However, if automatic login is set, login via the Admin Tool is possible while the main
menu or job menu is displayed.
If the normal screen display does not appear (for example: an "X" mark appears),
wait for a few minutes and try again. If the problem still occurs, contact your
FUJITSU scanner dealer or an authorized FUJITSU scanner service provider.
If a button is rapidly pressed many times in succession, a "Connection error"
message may appear. In this case, wait for a few minutes and try again.
For details about setting up to manage the scanner via a computer, refer to
Requirements for Admin Tool" (page
The default user name and password for the administrator are set as follows:
User name: admin
Password: password
The scanner setup can be configured by one user.
Session timeout time is 20 minutes (fixed). The session timeout time is extended by
a further 20 minutes for the following:
when a menu button is pressed
when the [OK] button is pressed
46).
87
"1.4.1