Setting Up For Administrator Access Via The Admin Tool; Checking The Internet Explorer Cache Settings - Fujitsu ScanSnap N1800 Operating Manual

4.2.2 Setting up for Administrator Access via the Admin Tool

This section describes the required settings for logging in via the Admin Tool.
The following are required for administrator login via the Admin Tool:

■ Checking the Internet Explorer Cache Settings

Check the Internet Explorer cache settings.
1. From the Internet Explorer [Tools] menu, select [Internet Options].
The [Internet Options] dialog box appears.
2. On the [General] tab, press the [Settings] button on the [Browsing
history].
The [Temporary Internet Files and History Settings] dialog box appears.
3. For [Check for newer versions of stored pages], select [Automatically].
4. For [Disk space to use], specify 63 MB or above.
5. Press the [OK] button.
If any updates or service packs are available for Internet Explorer, make sure they
are applied.
"4.5.1 Setting the Scanner Name" (page 94)
"4.7.3 Changing the Admin Password" (page 112)
"4.8.1 Giving the Scanner an IP Address" (page 113)
"4.8.8 Setting the Admin Connection" (page 123)
"4.8.2 Setting the DNS Server" (page 115)
"4.8.3 Setting the WINS Server" (page 116)
Different browser versions may require a different set up procedure.
Do not use a proxy server setting.
80
4.2 Administrator Login