Configuring The Network Settings; Giving The Scanner An Ip Address - Fujitsu ScanSnap N1800 Operating Manual

4.8

Configuring the Network Settings

4.8.1 Giving the Scanner an IP Address

An IP address must be set in order to connect the scanner to a network.
1. Select [Network Settings]
The DHCP or IP address setting window appears.
2. Select whether or not a DHCP is used.
3. When [Off] is selected, enter the following numerical addresses:
IP Address
Subnet Mask
Default Gateway
4. Press the [OK] button.
The information entered is set.
[Basic] [IP Address].
113