Deleting Scanner Configuration - Fujitsu ScanSnap N1800 Operating Manual

■ Deleting Scanner Configuration

This section describes how to exclude scanners from Central Admin management.
1. Press the [Config List] button in the Central Admin Console main
window.
The [Scanner Config List] window appears.
2. Select the check box for the scanner to be deleted.
3. Press the [Delete] button.
A confirmation window for whether or not to exclude the specified scanner(s)
from Central Admin management appears.
4. Press the [OK] button.
The scanner(s) are excluded from Central Admin management.
Deleting the scanner configuration does not exclude a scanner from Central Admin
management. Therefore, the Central Admin Server setting in the scanner will not be
"Unregistered". To exclude a scanner from Central Admin management, select the
Central Admin Server setting to [Off] in the scanner.
To exclude multiple scanners from Central Admin management at once, apply a
new set of scanner settings with Central Admin set to [Off] for target scanners.
To include the scanner in the Central Admin management again, re-register the
scanner on the Central Admin Server.
5.7 Setting Scanner Configuration
258