Cloning A Job Sequence; Editing A Job Sequence - Fujitsu ScanSnap N1800 Operating Manual

11. Press the [OK] button.
A job sequence is added to the [Jobs List] window.

■ Cloning a Job Sequence

This section describes how to clone a job sequence.
1. Press the [Job Sequences] button.
The [Jobs List] window appears.
2. Select the job sequence to be cloned.
3. Press the [Clone] button.
The [Job Details] window appears.
4. Clone the detailed job sequence settings.
5. Press the [OK] button.
A job sequence is added to the [Jobs List] window.

■ Editing a Job Sequence

This section describes how to edit a job sequence.
1. Press the [Job Sequences] button.
The [Jobs List] window appears.
2. Select the job sequence to be edited.
3. Press the [Edit] button.
The [Job Details] window appears.
4. Edit the detailed job sequence settings.
5. Press the [OK] button.
The settings of the job sequence are changed.
207