Filtering The Ldap List - Fujitsu ScanSnap N1800 Operating Manual

■ Filtering the LDAP List

This section describes how to filter the LDAP List on the [LDAP List] window.
1. For [User Name], select the display format for the user names shown on
the user name/e-mail address list.
2. Enter the LDAP server and character string to be used for LDAP
searches in the [Search Base] field.
The LDAP entries under the character string entered here will become the search
target.
3. For [Search Position], select the filtering method.
4. Enter the filter character strings in [User Name] and [e-Mail Address].
If both a user name and e-mail address are entered, data containing both are
searched for as an "AND Search".
5. Select the filter target.
If multiple items are selected, a search operation tries to find entries containing any
of the search items.
6. Select the [Find] button.
The filtered results appear.
If the [Find] button is selected, an authentication window appears.
Enter a [User Name] and [Password], and then press the [OK] button.
User names may be up to 129 characters long.
Passwords may be up to 256 characters long. [User Name] and [Password]
are case sensitive.
To clear filtered results, delete all filter strings and then press the [Find]
button.
209