Fujitsu ScanSnap N1800 Operating Manual page 316

The number of search results to be displayed can be set by the administrator.
For details, refer to
If items are missing for search results according to the display format of the
search results, "----" is shown instead.
For example, if the display format is "LastName FirstName", and the user
"LastName: Fujitsu, FirstName: None" is registered on the LDAP server, the
search result is displayed as "Fujitsu ----".
Search methods differ for the My List and LDAP List. Therefore, search
results differ according to the list selected.
Case
Diacritical/Accent marks
For My List search, the following also applies.
8. Select the desired e-mail target from the search results and press
The selected e-mail address is added to [Selected e-Mail Addresses].
To add multiple e-mail addresses, repeat this step.
Selecting an e-mail address and pressing
mail address to My List.
9. Press the [OK] button.
The e-mail address is added to the field in the [Send e-Mail] window.
"4.9.2 Setting the e-Mail LDAP Server" (page
Search String
All currently displayed levels and their subordinates are searched.
For groups that are shown in a search result, even if a group is selected,
the is disabled and the contacts of the group cannot be viewed.
316
6.4 Sending the Scanned Data by e-Mail
My List
Insensitive
Sensitive
can be used to add the e-
133).
LDAP List
Insensitive
Insensitive
.