3,2.5.5 Disassembling The Gear Train, Pf - Epson FX 1170 - B/W Dot-matrix Printer Service Manual

3.2.5.5 Disassembling the GEAR TRAIN, PF
[STEP 1] Remove the PAPER GUIDE ASSEMBLY, top cover, front cover, paper eject cover and tractor unit.
(See Section 3.2.1.)
Remove the PANEL UNIT. (See Section 3.2.2.)
Remove the HOUSING ASSEMBLY, UPPER. (See Section 3.2.4.)
Remove the PRINTER MECHANISM. (See Section 3.2.5.)
[STEP 41
Remove the MOTOR ASSEMBLY, CR. (See Section 3.2.5.3.)
[STEP 51
Remove the MOTOR ASSEMBLY, PF. (See Section 3.2.5.4.)
[STEP 61
Remove the FFC cables from the FRAME, SUB, RIGHT of the PRINTER MECHANISM, and then
[STEP 71
remove the two CBS (M3X8)
Remove the FRAME, SUB, RIGHT.
[STEP 81
Be sure to properly mesh the LEVER, RELEASE with the mechanism.
screws
Figure 3-13. Disassembling the GEAR TRAIN, PF
Assembly Note
Figure 3-14, Positioning the LEVER, RELEASE for Insertion
securing the FRAME,
' 1
CAM, CLUTCH, TRACTOR
3-14
SUB, RIGHT.
, .