DFX-8500
3.2.6.16 Left Gear Train Removal
1. Remove the left and right covers. (See Section 3.2.3.2.)
2. Remove the front panel. (See Section 3.2.3.3.)
3. Remove the upper case. (See Section 3.2.3.4.)
4. Remove the printer mechanism. (See Section 3.2.6.)
5. Remove the fan. (See Section 3.2.6.1.)
6. Remove the ribbon feed change lever unit. (See Section 3.2.6.2.)
7. Remove the tractor select lever. (See Section 3.2.6.3.)
8. Remove the connector junction board. (See Section 3.2.6.5.)
9. Remove the platen gap motor. (See Section 3.2.6.6.)
10. Remove the gears pictured in Figure 3-72 in numerical order.
Figure 3-72. Left Gear Train Removal
3-50