82 - Operating Scenarios; Playing Back Scenarios - Epson EMP-715 Owner's Manual

I Operating scenarios
It is possible to play back scenarios stored in the memory card.

Playing back scenarios

1
Press the [EasyMP] button on the remote control to switch across to EasyMP images.
The projected image will switch across to a list of EasyMP files, and the contents of the
memory card will be displayed.
Point
· Create scenarios with the special [EasyMP Software] software beforehand on the com-
puter in use. (see page 87)
· Scenario files that have been saved on the memory card as auto-run files will be automat-
ically played back from this screen.
2
Align the cursor with the scenario file to be played back, and then press the [Enter] but-
ton.
The scenario will be played back. The screen will automatically return to the file list dis-
play after the playback has been completed (the playback will be repeated if set for
repeat).
Although the preview will proceed in accordance with the conditions set for the scenario,
it is possible to proceed to the next screen by pressing the [Enter] button or return to the
previous screen by pressing the [Esc] key. Press the [EasyMP] button to end the playback.
point
It is not possible to advance to the next screen with the [Enter] button or return to the previ-
ous screen with the [Esc] button after the scenario source being executed has been
switched with the [Source Control] function in the scenario file.

82 - Operating scenarios

Scenario file